Category Archives: Uncategorized

In July of 2020, we had a horse come in the FootPro Shop that proved to be a good example of what can happen when hoof care is not done on a regular schedule. Dave Farley, CF APF-I came to … Continue reading →

The overwhelming majority of tools that are returned to manufacturers of top tools are not defective. Most tools show obvious signs of misuse and/or lack of maintenance. Even under correct use you have to realize top tools are not lifetime … Continue reading →

by Michael Wildenstein, CJF, FWCF (hons) “Conformation of an owner’s horse can be a very sensitive subject.” – Ted S. Stashak In my experience that statement is very true and includes individual horse owners that I felt were open-minded. Study … Continue reading →

Articles in past issues of the Natural Angle have focused on techniques, tools and other methods of bringing more efficiency into the daily routine of shoeing horses. We’ve assembled some images of the more common daily applications for various abrasives … Continue reading →

By Roy Bloom, CJF APF-I There are a lot of forging hammers in the market and just as many ideas as to how hard they should be. I have always held that the hammer hardness should not be more than … Continue reading →

by Sammy L. Williams, Mexico, MO I have shod horses professionally for over 55 years! I am primarily a Saddlebred farrier but have filled in with Morgans, Arabians, and various other breeds and disciplines in order to keep a full … Continue reading →

Dave Farley visited the FootPro Shop and did a variety of shoe modifications using the Kerckhaert SX-10 unclipped shoes. The SX-10 is a 3/8” thick shoe that allows you to do various modifications without sacrificing the strength of the shoe. … Continue reading →

THERE ARE ANY NUMBER OF TRACTION DEVICES ON THE MARKET TODAY but a few of the most useful and least likely to create problems with the upper limb are the Tungsten pins, drive-in studs and nails with hard facing. All … Continue reading →

Volume 3, Issue 1 of The Natural Angle featured a story on clipping shoes using the edge of the anvil. In the step by step discussion in that article we used a clipping hammer, which is similar to a ball … Continue reading →

By Dave Farley, CF APF-I and Roy Bloom, CJF APF-I The 12 Points of Reference article previously printed in the Natural Angle Volume 12, Issue 1, combined with the 12 points DVD “is a winning combination.” We both use these … Continue reading →